2GIG FT1E-345 eSeries Wireless Encrypted Flood and Temperature Sensor

Catch the leak before the damage.

A wireless flood and temperature sensor for 2GIG eSeries panels. It watches for standing water and temperature extremes and sends alerts to your panel.

$97.10 $132.10
In stock · only 1 left
See details
Fast shipping2GIGSecure checkout
2GIG FT1E-345 Flood and Temperature Sensor
Water on the floorWet alarm after 3 continuous min
Below 42°F or above 84°FTemperature alerts to the panel

Water and temperature problems start out of sight.

A leak or a freezing room can do costly damage before anyone notices. This sensor reports both conditions to your 2GIG eSeries panel.

✕
Without itWithout it, standing water or a temperature extreme can go unnoticed until the damage is done.
✓
With the FT1E-345With it, the panel gets a wet alarm or a temperature alert, plus a dry restore signal once water is gone.
What you get

Two sensors in one case

The FT1E-345 combines flood and temperature monitoring with encrypted wireless and a tamper-protected case.

Flood and temperature

An external probe detects standing water, and the sensor alerts when ambient temperature rises above 84°F (29°C) or falls below 42°F (6°C).

2GIG FT1E-345 eSeries Wireless Encrypted Flood and Temperature Sensor
5 yr

Typical battery life

The included CR2450 3V lithium battery is rated for up to five years of typical operation.

Encrypted 345 MHz wireless

eSeries encrypted 345 MHz transmission reduces the risk of signal takeovers.

Fully supervised

The sensor reports status, low battery and tamper conditions to the panel approximately every 70 minutes.

Tamper protection

The tamper-protected case triggers an alert if the cover is removed.

The brand

2GIG

58 2GIG products at Raztechs.

Shop 2GIG
  • Fast shippingUS and Canada
  • 30-day returnsOn eligible items
  • Quotes & sourcingJust ask
Details

Everything you need to know.

Brand2GIG
ModelFT1E-345
TypeWireless flood and temperature sensor
Series2GIG eSeries, encrypted
Wireless345 MHz
Wet alarmAfter 3 continuous minutes of detection
High temperature alertAbove 84°F (29°C)
Low temperature alertBelow 42°F (6°C)
SupervisionStatus report approximately every 70 minutes
BatteryCR2450 3V lithium, included
IncludedExternal flood probe and mounting hardware
CertificationsETL, FCC Part 15, IC
Description

2GIG FT1E-345 eSeries Wireless Encrypted Flood and Temperature Sensor

The 2GIG FT1E-345 is a wireless combination flood and temperature sensor designed to protect homes from environmental hazards. This eSeries encrypted sensor monitors for both water intrusion via an external probe and ambient temperature extremes, transmitting alerts directly to compatible 2GIG eSeries security panels.

The sensor detects standing water and sends a wet alarm after three continuous minutes of detection, followed by a dry restore signal once water is no longer present. For temperature monitoring, it alerts when ambient conditions exceed 84°F (29°C) or fall below 42°F (6°C), helping prevent costly damage from freezing or heat-related issues.

Built with eSeries encrypted 345 MHz wireless transmission, the sensor reduces the risk of signal takeovers and maintains full supervision with status reports approximately every 70 minutes. The tamper-protected case triggers an alert if removed, and a CR2450 3V lithium battery provides up to five years of typical operation. The sensor comes complete with an external flood probe and mounting hardware; ETL, FCC Part 15, and IC certifications confirm safety and regulatory compliance.

Key Features:
• Dual monitoring detects both flood conditions via external probe and temperature extremes (below 42°F or above 84°F)
• eSeries encrypted 345 MHz wireless transmission enhances security and reduces takeover risk
• Long battery life: CR2450 3V lithium battery included, rated for up to 5 years of typical operation
• Fully supervised sensor reports status, low battery, and tamper conditions to panel every 70 minutes
• Tamper-protected case triggers alert if cover is removed; external probe included with mounting hardware
• ETL listed, FCC Part 15 and IC compliant for regulatory adherence
Good to know: The sensor sends a wet alarm only after three continuous minutes of water detection, then a dry restore signal once water is no longer present.

Need help with compatibility?

Looking for a manufacturer part number, compatible replacement, or quantity order? Contact Raztechs for sourcing and quote support.

Request a quote
2GIG FT1E-345 eSeries Wireless Encrypted Flood and Temperature Sensor
At a glance

2GIG FT1E-345, ready to order.

  • Type: Wireless flood and temperature sensor
  • Series: 2GIG eSeries, encrypted
  • Wireless: 345 MHz
  • Wet alarm: After 3 continuous minutes of detection
$97.10FT1E-345